|
|
Description Tips for straight and boring cutters (SSS 25396-90)
|
Left tips
| Version 1 | L, mm | b, mm | s, mm | r, mm | angle alpha (degrees) | | 10051 | 10 | 6 | 3.5 | 4.0 | 18 | | 10151 | 20 | 12 | 7.0 | 7.0 | 18 | | 10271 | 12 | 8 | 3.0 | 5.0 | | | 10291 | 16 | 10 | 4.0 | 6.0 | 18 | | 10411 | 5 | 3 | 2.0 | 2.0 | | | 10431 | 6 | 4 | 2.5 | 2.5 | | | 10451 | 8 | 5 | 3.0 | 3.0 | | | 10471 | 12 | 8 | 5.0 | 5.0 | 18 | | 10491 | 16 | 10 | 6.0 | 6.0 | 18 | | 10531 | 25 | 14 | 8.0 | 8.0 | 18 | | 10571 | 32 | 18 | 10.0 | 10.0 | 18 | | 10611 | 40 | 22 | 12.0 | 12.0 | 18 | | 10631 | 50 | 25 | 14.0 | 14.0 | 18 | | 70051 | 10 | 6 | 3.5 | 4.0 | 8 | | 70151 | 20 | 12 | 7.0 | 7.0 | 8 | | 70291 | 16 | 10 | 4.0 | 6.0 | 8 | | 70311 | 18 | 12 | 4.5 | 7.0 | 8 | | 70371 | 50 | 20 | 8.0 | 12.5 | 8 | | 70471 | 12 | 8 | 5.0 | 5.0 | 8 | | 70491 | 16 | 10 | 6.0 | 6.0 | 8 | | 70511 | 25 | 14 | 5.5 | 8.0 | 8 | | 70531 | 25 | 14 | 8.0 | 8.0 | 8 | | 70551 | 32 | 16 | 6.0 | 10.0 | 8 | | 70571 | 32 | 18 | 10.0 | 10.0 | 8 | | 70591 | 40 | 18 | 8.0 | 10.0 | 8 | | 70611 | 40 | 22 | 12.0 | 12.0 | 8 | | 70631 | 50 | 25 | 14.0 | 14.0 | 8 |
Right tips
| Version 2 | L, mm | b, мм | s, mm | r, mm | angle alpha (degrees) | | 10061 | 10 | 6 | 3.5 | 4.0 | 18 | | 10161 | 20 | 12 | 7.0 | 7.0 | 18 | | 10301 | 16 | 10 | 4.0 | 6.0 | 18 | | 10481 | 12 | 8 | 5.0 | 5.0 | 18 | | 10501 | 16 | 10 | 6.0 | 6.0 | 18 | | 10541 | 25 | 14 | 8.0 | 8.0 | 18 | | 10581 | 32 | 18 | 10.0 | 10.0 | 18 | | 10621 | 40 | 22 | 12.0 | 12.0 | 18 | | 10641 | 50 | 25 | 14.0 | 14.0 | 18 | | 70061 | 10 | 6 | 3.5 | 4.0 | 8 | | 70161 | 20 | 12 | 7.0 | 7.0 | 8 | | 70301 | 16 | 10 | 4.0 | 6.0 | 8 | | 70321 | 18 | 12 | 4.5 | 7.0 | 8 | | 70381 | 50 | 20 | 8.0 | 12.5 | 8 | | 70481 | 12 | 8 | 5.0 | 5.0 | 8 | | 70501 | 16 | 10 | 6.0 | 6.0 | 8 | | 70521 | 25 | 14 | 5.5 | 8.0 | 8 | | 70541 | 25 | 14 | 8.0 | 8.0 | 8 | | 70561 | 32 | 16 | 6.0 | 10.0 | 8 | | 70581 | 32 | 18 | 10.0 | 10.0 | 8 | | 70601 | 40 | 18 | 8.0 | 10.0 | 8 | | 70621 | 40 | 22 | 12.0 | 12.0 | 8 | | 70641 | 50 | 25 | 14.0 | 14.0 | 8 |
|
|
 |
|
|
Inserts for cutters 
